(no subject)

[Mike Minor]

John... Good point.

My pc running the vnc server is an XP pro machine, sp2. It is not connected 
to a router yet, wanting to add only one complication at a time. The pc is 
connected directly to the dsl modem. I was given an IP address that would be 
my static IP, and when I checked it using whatismyip.com, it does come back 
with the IP i was provided.

I am using MS' built in firewall, and I have VNC Server set up in it as an 
exception to be allowed.

Thank you,

Mike Minor
Z-Code Systems, Inc.
mminorhsd "at" earthlink.net
Phone: 407-656-4990
Fax: 407-656-5875

Confidentiality Note:

This e-mail and any attachements to it are intended only for the named 
recipient/s and may contain confidential information. If you are not one of 
the intended recipients, please do not duplicate or forward this e0mail 
message and immediatley delete it from your computer.

----- Original Message ----- 
From: "John Aldrich" <JAldrich "at" covista.com>
To: "'Mike Minor'" <mminorhsd "at" earthlink.net>; <VNC-LIST "at" realvnc.com>
Sent: Wednesday, January 26, 2005 11:09 AM
Subject: RE: (no subject)


> http://www.whatismyip.com and find out what your external IP is and then 
> try
> again using that IP.
>
> also, you don't give any details on what O/S, revision, etc you are using.
> Also, what about firewalls (hardware and software)?
> John
>
> -----Original Message-----
> From: Mike Minor [mailto:mminorhsd "at" earthlink.net]
> Sent: Wednesday, January 26, 2005 10:32 AM
> To: VNC-LIST "at" realvnc.com
> Subject: (no subject)
>
>
> I just converted from a dynamic ip address dsl service to a static ip
> address
> dsl service on the VNC server end. I was able to connect to the server
> previously, just had to check the new ip address every time I reconnectd 
> to
> the internet. Now, I can't seem to connect to the vnc server. I get a
> message
> that it is timing out on the connection.
>
> On the vnc server, when I was on a dynamic connection, I would hover over
> the
> VNC server helper icon in the sys tray to get the address. Now with the
> static
> ip, when I hover over the icon, it doesn't show the ip address.
>
> Does anyone have an suggestions on how to et my connection working again?
>
> Thank you,
>
> Mike Minor
>
> Thank you,
>
> Mike Minor
> Z-Code Systems, Inc.
> mminorhsd "at" earthlink.net
> Phone: 407-656-4990
> Fax: 407-656-5875
>
> Confidentiality Note:
>
> This e-mail and any attachements to it are intended only for the named
> recipient/s and may contain confidential information. If you are not one 
> of
> the intended recipients, please do not duplicate or forward this e0mail
> message and immediatley delete it from your computer.
> _______________________________________________
> VNC-List mailing list
> VNC-List "at" realvnc.com
> To remove yourself from the list visit:
> http://www.realvnc.com/mailman/listinfo/vnc-list
> _______________________________________________
> VNC-List mailing list
> VNC-List "at" realvnc.com
> To remove yourself from the list visit:
> http://www.realvnc.com/mailman/listinfo/vnc-list