Change IP Port to 32

[Matthew.van.Eerde@hbinc.com]

> From: Vincent Tilley [mailto:vincent.tilley "at" hitachi.ca]
> Port 32 has been forwarded to a private IP address which is to be
connected
> to remotely using VNC.  I am trying to set the port in VNC server to use
> port 32 which in turn the VNC viewer also has to access that port
x.x.x.x:32

On the server, do this:
Set the "Display Number" to 32 + 2^n - 5900 for some value of n appropriate
to your platform.  Try n=32, n=16, n=...

After each attempt, telnet to 127.0.0.1 port 32 (from the server to the
server) and see if you get the RFB.RFB response.

Once this is done...

On the client, telnet to xx.xx.xx.xx port 32 (don't try to use the client
yet.)  Verify that you're not being firewalled off anywhere.  See if you get
the RFB.RFB response.

Then use the viewer.  Set the display number to 32 + 2^n - 5900 for values
of n appropriate to the client platform.

Matthew.van.Eerde "at" hbinc.com                      805.964.4554 x902
Hispanic Business Inc./HireDiversity.com         Software Engineer
perl -e"map{y/a-z/l-za-k/;print}shift" "Jjhi pcdiwtg Ptga wprztg,"