question regarding realvnc for unix (sol 9)

Agle, Matthew Matthew.Agle "at" fanucrobotics.com
Tue Jan 6 15:19:00 2004


#!/bin/sh

xrdb $HOME/.Xresources
xsetroot -solid grey
/usr/dt/bin/Xsession &

Sincerely,

Matthew C. Agle - MCP, MCSA
Technical Specialist - Desktop Support
FANUC Robotics Information System Department
Phone:  1-248-276-4256
Fax:  1-866-743-2586
Email:  matthew.agle "at" fanucrobotics.com


-----Original Message-----
From: Steve Palocz [mailto:spalocz "at" tgtsolutions.com] 
Sent: Tuesday, January 06, 2004 10:15 AM
To: Agle, Matthew
Cc: vnc-list "at" realvnc.com
Subject: RE: question regarding realvnc for unix (sol 9)

Can you please cat your xstartup file from {home}/.vnc

Thanks

Steve

-----Original Message-----
From: Agle, Matthew [mailto:Matthew.Agle "at" fanucrobotics.com] 
Sent: Tuesday, January 06, 2004 10:08 AM
To: Steve Palocz; Jeff Boerio
Cc: vnc-list "at" realvnc.com
Subject: RE: question regarding realvnc for unix (sol 9)

Hi Steve,

	It does have the & at the end of the line and I have tried it
without and that doesn't seem to work.  I am starting to wonder if
uninstalling/reinstalling the app as root would be a good idea?

Sincerely,

Matthew C. Agle - MCP, MCSA
Technical Specialist - Desktop Support
FANUC Robotics Information System Department
Phone:  1-248-276-4256
Fax:  1-866-743-2586
Email:  matthew.agle "at" fanucrobotics.com


-----Original Message-----
From: Steve Palocz [mailto:spalocz "at" tgtsolutions.com] 
Sent: Tuesday, January 06, 2004 9:02 AM
To: Agle, Matthew; 'Jeff Boerio'
Cc: vnc-list "at" realvnc.com
Subject: RE: question regarding realvnc for unix (sol 9)

Hey Matthew,

Lets see your xstartup file found in {home}/.vnc

When you run vncserver do you run it with an ampersand &  ???

If so then try without and see if you get the command prompt back. If
not, an item in the xstartup needs the ampersand to send it in the
background.

Steve

-----Original Message-----
From: vnc-list-admin "at" realvnc.com [mailto:vnc-list-admin "at" realvnc.com] On
Behalf Of Agle, Matthew
Sent: Monday, January 05, 2004 10:30 PM
To: Jeff Boerio
Cc: vnc-list "at" realvnc.com
Subject: RE: question regarding realvnc for unix (sol 9)

Jeff,

	I am at a command prompt and to exit the telnet session I simply
type exit.  The vncserver is still running (or appears to be) and I
verified this by closing the vncviewer that goes gray and then opening
it again.  Someone told me that I might have to remove/reinstall
vncserver as root so it sets itself up as a daemon but it should have
done that when I initially installed that as a sysadmin.

Sincerely,

Matthew C. Agle - MCP, MCSA
Technical Specialist - Desktop Support
FANUC Robotics Information System Department
Phone:  1-248-276-4256
Fax:  1-866-743-2586
Email:  matthew.agle "at" fanucrobotics.com


-----Original Message-----
From: Jeff Boerio [mailto:boerio "at" ichips.intel.com] 
Sent: Monday, January 05, 2004 7:19 PM
To: Agle, Matthew
Subject: Re: question regarding realvnc for unix (sol 9)

Matthew,

Is the vncserver script exiting?  In other words, when you try to log
out from your telnet session, are you at a command prompt?  Or, do you
need to take some relatively drastic action in order to get back to a
command prompt?

     - Jeff

On Mon, 2004-01-05 at 12:43, Agle, Matthew wrote:
> Hello,
> 
> 
> 
>             In regards to running vnc, I am experiencing a issue and
> wondered if anyone has seen this/fixed this issue as well.  The
problem
> I am having is as follows:
> 
> 
> 
> I am currently running a sparc ultra station 5 with solaris 9 and the
> latest cluster patches.  I have downloaded and installed the latest
vnc
> software package and configured it to run CDE/Enlightenment as a GUI
> that I often use with a Windows XP SP1A machine.  The problem I have
is
> this; I telnet into my Solaris box, start vnc by issuing the command
> vncserver and then from Windows I use vncviewer to open the screen.
It
> opens the display and starts the GUI fine and everything seems to work
> ok however when I go back and kill my telnet session to my box, the
vnc
> screen goes gray and the desktop is no longer accessible.  I am not
sure
> how to resolve this and any insight would be greatly appreciated!
> Thanks to any/all who reply!
> 
> 
> 
> 
> 
> Sincerely,
> 
> 
> 
> Matthew C. Agle - MCP, MCSA
> 
> Technical Specialist - Desktop Support
> 
> FANUC Robotics Information System Department
> 
> Phone:  1-248-276-4256
> 
> Fax:  1-866-743-2586
> 
> Email:  matthew.agle "at" fanucrobotics.com
> <mailto:matthew.agle "at" fanucrobotics.com>
> _______________________________________________
> VNC-List mailing list
> VNC-List "at" realvnc.com
> To remove yourself from the list visit:
> http://www.realvnc.com/mailman/listinfo/vnc-list
_______________________________________________
VNC-List mailing list
VNC-List "at" realvnc.com
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list