Connect to several servers behind a router over internet
DILATED_ONE "at" hotmail.com
Mon Aug 23 14:52:00 2004
Each box you need to set the viewer number. It says accept on port, yours
are all set to 5900. So coming in via the internet your router passes the
traffic to the first box. Start with 5900 and work your way up 5900, 5901 ,
5902 and so on.THEN in yout linksys router there is a pager under advanced
called forwarding. You need to set the ports up that tie to your computers.
5900 is 192.168.1.100 (Office1)
5901 is 192.168.1.101 (Office2)
5903 is 192.168.1.102 (Notebook)
5904 is 192.168.1.103 (Fileserver)
Select the tcp box and check mark the enable box and apply the changes. Also
make sure on these end user systems you are setting static ip's of the above
so the forwarding will work. Then when you are trying to connect VIA the
internet you would use it like this
The viewer number tells your router where it wants to go, the router has the
forwarding table in place and passes the traffic to the proper system
From: vnc-list-admin "at" realvnc.com [mailto:vnc-list-admin "at" realvnc.com] On
Behalf Of benjamin "at" zbornikcity.de
Sent: Monday, August 23, 2004 6:28 AM
To: vnc-list "at" realvnc.com
Subject: Connect to several servers behind a router over internet
I am using VNC with several workstations in a LAN and it works very
well. Also connection through a firewall-router are working.
But now i have a little problem:
I assembled a network at a company with three workstations.
Workstation 1: 192.168.1.100 (Office1)
Workstation 2: 192.168.1.101 (Office2)
Workstation 3: 192.168.1.102 (Notebook)
Workstation 4: 192.168.1.103 (Fileserver)
Internet-Connection is over a WLAN-Firewall-Router (Linksys WRT54G)
with IP 192.168.1.1. The ports 5800 and 5900 are open for the use with
VNC and are forwared to all for IP`s of the workstations.
On every workstation the VNC4 Server is installed and starts at
NOW THE PROBLEM:
How do i connect to the several workstation behind the firewall-router.
When i enter the IP of the router (e.g. 80.xxx.xx.xx) i always get
connected to the workstation OFFICE1 with the IP 192.168.1.100.
How can i specify when entering which workstation i want to connect
VNC-List mailing list
VNC-List "at" realvnc.com
To remove yourself from the list visit: