VNC host crashes when triing to connect

[Alex K. Angelopoulos]

Yes.  The ORL version 3.3.3.9 uses MSVCIRT.DLL version 6.0.8168.0 and MSVCRT.DLL
6.1.8637.0 as installed.

----- Original Message -----
From: "Keith Hall" <K.Hall "at" servicepower.com>
To: <vnc-list "at" uk.research.att.com>; <vnc-tight-list "at" lists.sourceforge.net>
Sent: Monday, 2002-05-20 02:32
Subject: RE: VNC host crashes when triing to connect


> I have seen this happen again. On a machine that it worked 100% fine on with
> Win2k, when I re-loaded the machine with NT4 SERVER, the VNC server dies on
> connect and there's no way to fix unless you visit the actual machine to
> clear down the error and restart the service.
>
> TightVNC 1.2.3 used in this instance. Only other software: Visual C++ 6.0
> Sp4, Oracle 8.1.7 client. Oracle replaced MFC42.DLL and MSVCIRT.DLL + one or
> two others during install - does TightVNC use these?
>
> Anyone else come across this recently?
>
> Keith.
>
> > -----Original Message-----
> > From: Keith Hall [mailto:K.Hall "at" servicepower.com]
> > Sent: Thursday, February 21, 2002 10:03 AM
> > To: 'vnc-list "at" uk.research.att.com'
> > Subject: RE: VNC host crashes when triing to connect
> >
> >
> > I have too seen this problem on a new machine, although first
> > showed up with
> > TightVNC, so I uninstalled and used 3.3.3r9 I always used
> > before, but that
> > occasionally did it too (mainly after a reboot before logging
> > on). Memory
> > exception trying to access byte 0 of memory or something... I
> > put it down to
> > a peculiarity with the display driver in the end (I still
> > have the problem
> > after changing drivers though)...
> >
> > There's one other machine that crashed in the same way with
> > TightVNC after
> > 'upgrading' from WinVNC 3.3.3r9, but no repeat of the problem.
> >
> > Both were running NT 4 server. I have used VNC (and upgraded most to
> > TightVNC now with a nice little Kix script that does it all
> > unattended) with
> > no problems.
> >
> > So there's something odd happening somewhere...
> >
> > Keith.
> >
> > > -----Original Message-----
> > > From: George Moraetes [mailto:George "at" Moraetes.com]
> > > Sent: Monday, February 18, 2002 11:25 PM
> > > To: vnc-list "at" uk.research.att.com
> > > Subject: Re: VNC host crashes when triing to connect
> > >
> > >
> > > No it does not recover. On servers  need to restart the service
> > > manually. It connects but periodically it crashes the service
> > > (stops) it.
> > >
> > > A royal pain.
> > >
> > > Phil Reynolds wrote:
> > > >
> > > > On Mon, Feb 18, 2002 at 10:08:08AM -0600, George Moraetes wrote:
> > > > > Hello all,
> > > > >
> > > > > Has anyone encountered this issue where the VNC host app running
> > > > > as a service on Windows NT 4.0 or 2000 periodically crashes when
> > > > > the client tries to connect?
> > > > >
> > > > > I have observed this on the latest version 3.3.3v9 and I was
> > > > > wondering if anyone has a solution.
> > > >
> > > > Does it recover?
> > > >
> > > > I have seen much this effect in Windows 98. I have checked for the
> > > > obvious (resolution change) to no avail.
> ---------------------------------------------------------------------
> To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
> 'unsubscribe vnc-list' in the message BODY
> See also: http://www.uk.research.att.com/vnc/intouch.html
> ---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------