ConnectPriority - Registry info

tmillar@idrc.ca tmillar "at" idrc.ca
Thu, 24 Jan 2002 16:10:53 +0000


Denis,

Thank you for your reply..."option" in the VNCviewer Properties?  There's no 
such thing...or am I missing something?

Tracy Millar
ITMD/DGTI
IDRC/CRDI
(613) 236-6163 ext 2581
tmillar "at" idrc.ca
http://intra1.idrc.ca/mis-sig
---------- Original Text ----------

From: "St Jean, Denis" <Denis.StJean "at" Compaq.com>, on 2002/01/24 11:02 AM:
To: iSMTP "at" HQNT11@Servers[<vnc-list "at" uk.research.att.com>],Tracy Millar "at" MIS 
SIG "at" IDRC CRDI

Hello Tracy,

I've had the same problem w/ Wintel based connections. it seems like the
only way around this is when you connect via the VNCviewer, is to go
into "options", and click on "Request shared session" under misc.

That works ok, the only problem is the default setting is "off" so
people have to remember to click it on before proceeding with the
connection.

Good luck,

Denis.

-----Original Message-----
From: Tracy Millar [mailto:tmillar "at" idrc.ca]
Sent: Thursday, January 24, 2002 10:09 AM
To: vnc-list "at" uk.research.att.com
Subject: Re: ConnectPriority - Registry info


Hi there,

I actually made the changes on my server to reflect what Alex has and
still
the same results, the VNC server connection gets dumped when a second
connection is attempted.

Tracy

---------- Original Text ----------

From: "Alex Angelopoulos" <alex "at" bittnet.com>, on 2002/01/23 1:23 PM:
To: iSMTP "at" HQNT11@Servers[<vnc-list "at" uk.research.att.com>],Tracy
Millar "at" MIS
SIG "at" IDRC CRDI

COMPARISON OF REGISTRY VALUES

(SUMMARY NOTE: Tracy is having an issue with having a VNC server
connection
dumped when someone else connects to the same system.
She has, as can be seen, created the ConnectPriority DWORD with a value
of
"2", restarted the server, etc.)

Just a quick note - I am going to try checking this out on my system,
but I
did a quick check on the registry values.  The only
differences in our setups were the following values:

"AutoPortSelect" - mine was 1 as opposed to your "0" - but see next item
"PortNumber" - you had this which I didn't, but yours is set to
0x170c(5900),
the default
"IdleTimeout" - Yours is "0"; I didn't have this setting
"ConnectPriority" - I had this set to "1"from checking your problem last

week, and I *did* connect successfully from 2 locations
simultaneously.





---- Original Message -----
From: "Tracy Millar" <tmillar "at" idrc.ca>
To: <vnc-list "at" uk.research.att.com>
Sent: Wednesday/2002 January 23 12:38
Subject: Re: ConnectPriority - Registry info


: As requested, here are the registry files as per below...
:
: *********
: REGEDIT4
:
: [HKEY_CURRENT_USER\Software\ORL\WinVNC3]
: "SocketConnect"=dword:00000001

: "AutoPortSelect"=dword:00000000
Mine is 1; obviously you have a custom port setting

: "PortNumber"=dword:0000170c
Which is here...and is set to 5900 manually

: "InputsEnabled"=dword:00000001
: "LocalInputsDisabled"=dword:00000000

: "IdleTimeout"=dword:00000000
I don't even have this

: "QuerySetting"=dword:00000002
: "QueryTimeout"=dword:0000000a
: "PollUnderCursor"=dword:00000000
: "PollForeground"=dword:00000001
: "PollFullScreen"=dword:00000000
: "OnlyPollConsole"=dword:00000001
: "OnlyPollOnEvent"=dword:00000000

: "ConnectPriority"=dword:00000002
I set this to "1" for a test earlier and was able to do 2 simultaneous
connects

: *******************
: REGEDIT4
:
: [HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3\Default]
: "SocketConnect"=dword:00000001
: "AutoPortSelect"=dword:00000000
Didn't have this here

: "PortNumber"=dword:0000170c
Again, didn't have this

: "InputsEnabled"=dword:00000001
: "LocalInputsDisabled"=dword:00000000

: "IdleTimeout"=dword:00000000
Didn't have this here either

: "QuerySetting"=dword:00000002
: "QueryTimeout"=dword:0000000a
: "PollUnderCursor"=dword:00000000
: "PollForeground"=dword:00000001
: "PollFullScreen"=dword:00000000
: "OnlyPollConsole"=dword:00000001
: "OnlyPollOnEvent"=dword:00000000

: "ConnectPriority"=dword:00000002
Again, had a test setting of 1
: Attachment(s):
: HKCU.REG
: HKLM.REG
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------