VNC won't start on WIN98SE Pentium II
MichaelLashinsky@drugplastics.com
MichaelLashinsky "at" drugplastics.com
Mon, 11 Feb 2002 17:52:16 +0000
Are the passwords the same for both machines? Are the OS's the same? If
so, go to the good machine and "export the ORL key onto a file and transfer
it to the bad machine. If you install the reg settings there it might get
your settings correct nfor you.
Have a Good Day,
Michael L.
"Roger Cuthbert"
<rhcuthbert "at" dodlaw.co.uk To: <vnc-list "at" uk.research.att.com>
> cc:
Sent by: Subject: RE: VNC won't start on WIN98SE Pentium II
owner-vnc-list "at" uk.resear
ch.att.com
02/11/2002 11:44 AM
Please respond to
vnc-list
Michael,
I did as you wrote but no change. I then restarted in Safe Mode and was
able to start WinVNC and this time get a window for setup, I gave a
password
and then restarted the computer. Now I could start WinVNC and right click
the icon and go to Properties. Here the Accept Socket Connection was
un-checked and the password grey. After checking and click OK we are back
where we started, the program hangs. I do a ctrl-alt-del and kill the not
responding WinVNC. However, when shutting down, I now get three blue
screens one after the other but Enter clears to machine shut down.
Next I'll try killing anything not essential before opening WinVNC.
Any other suggestions.
Roger Cuthbert
-----Original Message-----
From: owner-vnc-list "at" uk.research.att.com
[mailto:owner-vnc-list "at" uk.research.att.com]On Behalf Of
MichaelLashinsky "at" drugplastics.com
Sent: 11 February 2002 13:31
To: vnc-list "at" uk.research.att.com
Subject: RE: VNC won't start on WIN98SE Pentium II
Robert,
You probably made a mistake somewhere in the install and setup and
cannot find it. I would suggest going to the troubled machine and
uninstalling VNC. Then go into the registrry and delete the 'ORL' keys.
Make sure you search the entire registry for any references to ORL or VNC
so you get it all out. After completely removing all VNC related items
from the registry, start menu, and program files folder then reboot and
reinstall from scratch. Now that you are more familiar with the program,
you shouldn' t make any inadvertent mistakes installing and setting up. I
did this a few times until I felt I understood the program well enough to
deploy it throughout my network.
Have a Good Day,
Michael L.
"Roger Cuthbert"
<rhcuthbert "at" dodlaw.co.uk To:
<vnc-list "at" uk.research.att.com>
> cc:
Sent by: Subject: RE: VNC
won't start on WIN98SE Pentium II
owner-vnc-list "at" uk.resear
ch.att.com
02/11/2002 07:57 AM
Please respond to
vnc-list
I did steps 1 and 2 but with the same result. I get no window to add the
password. I get no window when I ask for the 'about' box. The computer
says it is running if I try to reload.
When I do alt-ctrl-del and kill WinVNC and then remove from the control
panel I always get blue problem screen when shutting down or rebooting.
I've looked at the register and that seems OK.
Any help please.
Roger
-----Original Message-----
From: owner-vnc-list "at" uk.research.att.com
[mailto:owner-vnc-list "at" uk.research.att.com]On Behalf Of Nfosdick "at" aol.com
Sent: 10 February 2002 21:19
To: vnc-list "at" uk.research.att.com
Subject: Re: VNC won't start on WIN98SE Pentium II
There is a place on the start menu
step 1:
start/programs/VNC/admin tools/install service
step 2:
sart/programs/vnc/admin tools/show default settings
Step one will put the icon in your sys tray. Step two will config the
settings, or you can just click on the sys tray icon.
In a message dated 2/10/02 12:27:57 PM Mountain Standard Time,
rhcuthbert "at" dodlaw.co.uk writes:
> I have 2 machines running WIN98SE. On the Duron 800M I have no problems
> starting the VNC as an Application and I can view from the Pentium II.
> However I can start the App. as server on that Pentium II. The 'Install
> Default Registry Settings' runs OK but when I the try to Run WinVNC it
> seems
> to start but there is no Icon and no window to set the password. If I
try
> again it states that there is already an instance of VNC running, but I
can
> not contact it from the other machine. I then remove it or try and have
> problems closing down Windows.
>
> Any Ideas please, I have run all the tests I can on my machine but all is
> correct and runs every thing just fine.
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------