Another new user

Kredalgnomie kredal "at" kredal.com
Tue, 25 Sep 2001 00:37:31 +0000


Go in to the registry, and find the following entry:

HKEY_CURRENT_USER\Software\ORL\WinVNC3

change the setting called PortNumber to 100 higher than you want it to be
from the browser.  If you want to connect on port 80, you would enter "180"
in decimal.  When you look in the option screen, it would be something
really long like 4294961580.  That means it worked!  Your server is now
listening on port 80 for the http connection, and 180 for the data.  Hope
this works for everyone with this problem!

----- Original Message -----
From: "Nieltawee, Lake" <Lake.Nieltawee "at" schwab.com>
To: <vnc-list "at" uk.research.att.com>
Sent: Friday, April 14, 2000 7:53 PM
Subject: RE: WinVNC on port 80 - the solution



> Thank you everyone for all the helps. Even though the answer was not
really
> work, but it give a hint. Since someone has done it before, there must be
a
> way.
>
> With David answer, I went into the registry and realized that the
PortNumber
> (in dec) is 5900), but I connect to it through :5800 from a browser.
> Therefore, the program took the number and subtract it by 100. If I want
> port 80, I must key in 180 (in dec.) into the registry. With the decimal
> 180, it shows up with the number 4294961576 in the preference setting. I
am
> not sure what arithmetic calculation it us, but it works.
>
> Thank you so much,
>
> Lake N.


----- Original Message -----
From: "Kredalgnomie" <kredal "at" kredal.com>
To: <vnc-list "at" uk.research.att.com>
Sent: Monday, September 24, 2001 6:08 PM
Subject: Re: Another new user


> I have exactly the same problem.  I have a feeling the firewall on the
> client end is being mean and stopping all connections over a certain port.
> Tonight I'm going to set up the server to watch for port 250 or so.
> Hopefully the firewall will let that pass!
>
> Josh
>
>
> ----- Original Message -----
> From: "Ed Schwartz" <schwartz "at" aaps.k12.mi.us>
> To: <vnc-list "at" uk.research.att.com>
> Sent: Saturday, September 22, 2001 7:20 AM
> Subject: FW: Another new user
>
>
> > Have used VNC at home over local lan with my Mac powerbook (OS9.1)  and
2
> > other PC's (Win98 2nd ed).  Also have cable modem to the outside world
at
> > home.
> > When I tried to connect from work on the same powerbook (through a
> firewall,
> > going out shouldn't? be a problem), I get a t-disconnect error.  Am able
> to
> > FTP to my machine at home, so I know IP configurations are correct.
> > I've looked through archives, etc, only thing I found was a possible
Open
> > Transport issue, so I did make sure it was always available.
> > Any other suggestions?  Would adding a registry key on the VNC server
> > machine (Querytimeout) help?  If so, exactly how do I do that?
> >
> > Thanks for any help.
> >
> >
> > Ed Schwartz
> > ---------------------------------------------------------------------
> > To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
> > 'unsubscribe vnc-list' in the message BODY
> > See also: http://www.uk.research.att.com/vnc/intouch.html
> > ---------------------------------------------------------------------
> ---------------------------------------------------------------------
> To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
> 'unsubscribe vnc-list' in the message BODY
> See also: http://www.uk.research.att.com/vnc/intouch.html
> ---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------