Access only through a single NIC in Multi-NIC System
Duane Waddle
waddle1 "at" us.ibm.com
Fri, 05 Oct 2001 13:41:00 +0000
Use the WinNT Port security option to block inbound access to <your vnc
port here> on the adapter you don't want it on. A more secure setup would
be to block all that you _don't_ want on that adapter...
--D
Duane Waddle
waddle1 "at" us.ibm.com
"With sufficient thrust, pigs fly just fine..." -- RFC1925
Ben Metzler
<benjamintm "at" yahoo.com> To: vnc-list "at" uk.research.att.com
Sent by: cc:
owner-vnc-list "at" uk.resear Subject: Access only through a single NIC in Multi-NIC
ch.att.com System
10/04/01 09:01 PM
Please respond to
vnc-list
Hi all,
Okay, I need to be able to control WinVNC from only one NIC in a dual NIC
computer.
Essentially I am setting up a NAT/File Server/Print Server and I want to be
able
control this machine from inside the NAT, but not allow anyone from the
outside to
have control. I am using Win2K server. I have tried to use the AuthHosts
registry
settings, but I'm still able to connect from either side. The AuthHosts is
currently set to "-:+192.168.0", this this being the IP addresses that the
DHCP on
this server is assigning out.
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------