VNC, DNS2GO and DLINK 704 ROUTER

[Dietmar.Friesch@isisconsulting.de]

1. Outgoing/client side
	usually nothing much to configure
2. Incoming/Server side
   (i)  if the router does NAT the specific ports 
        of each PC must be routed to that specific PC
   (ii) The servers on each PC must be regedit-ed to
        their specific port
3. Connection
   The connecting IP adress id the public IP of the 
   router:  router_ip:server_port
4. Administration
   VNCCommander is a good tool to keep track etc
5. Hint
   Some routers for some reason or the other cannot
   handle two server ports when using the javainterface
   Hence it's a good idea to set the port server port
   to e.g. 5800 and putting 5800 in the port section
   of <params> thereby initiating and communicating 
   over the same port; under normal setup conditions
   port must not be <100. The host section of 
   <params> in html is equally the public IP of the
   router.
   What appears obvious to me unless otherwise instructed
   is that you need the public (dynamic) IP of the router
   by whatever means you get hold of (which might be bother-
   some if you need to use and therefore reconfigure htmls)
6. D2go
   I don't know how exactly it will work with dynamic adressing
   but..
   it works with fixed public adresses if you set Service Settings
   to "redirect web requests" "my current IP adress on port PORT"
   e.g. 5800. Unfortunately you've got only one redirector...
   The trick is to use one of the PCs at the client's as sort
   of Gateway. I.e. you got to install the viewer on one of 
   these and  - once connected you can open the viewer from there
   and view the others
Dietmar 
   	
-----Original Message-----
From: owner-vnc-list "at" uk.research.att.com
[mailto:owner-vnc-list "at" uk.research.att.com] On Behalf Of Greg S. Miller
Sent: Tuesday, November 06, 2001 6:05 AM
To: vnc-list "at" uk.research.att.com
Subject: VNC, DNS2GO and DLINK 704 ROUTER


Does anybody know how to configure my router so that I would be able to
access my clients pc's that are behind this same router?
 
Here's what I want to do:
 
My pc --> My DLINK704 Router --> Internet --> Clients DLINK704 Router
--> VNC on pc 1,2,3,4,5
 
What I would be doing since we both have dynamic IP's would be to use
the DNS2GO service to access the IP.  I have not been able to even get
to the authentication screen.  Any help would be appreciated.
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY See also:
http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, mail majordomo "at" uk.research.att.com with the line:
'unsubscribe vnc-list' in the message BODY
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------