VNCProxy-help

[Mark Debenham]

There are multiple programs that can proxy, MS Prooxy 2.0 can be configured
to do so, as can any routing firewall.
However there are two main tools I use (which in their methodology are
ancient however what you trust for links to the outside world is always
important) these are NetCat (originally a Nix tool which was ported to NT by
~weld of L0pht) or RelayTCP at www.dlcsistemas.com
Both should work fine aslong as there is not too great a number of packets
going through. If neither of those work I recommend that you configure a
proxy server (squid would do it nicely I imagine) to do so.
Mark

-----Original Message-----
From: icelala "at" empal.com [mailto:icelala "at" empal.com] 
Sent: 26 June 2001 02:13
To: "vnc-list "at" uk.research.att.com"
Subject: VNCProxy-help


hi.

i try to connect to VNCserver through VNCProxy.

 

VNCviewer <----> VNCProxy <----> VNCServer

(VNCviewer connect to VNCProxy with VNCProxy's IP address)

 

this is my work.

VNCviewer, VNCProxy, VNCserver are seperated physically(with different IP
address)

in contributed, there are VNCProxy I know, but i failed to run successfully.

Someone adviced to me that TCP/iP redirector is good solution on my
approach.

he said...

That's easy. All you need is a simple TCP/IP redirector, also known as
mirror, relay or poor man's proxy.

-open a server-socket,
-wait for incoming connection from client and accept it.
-then connect to server
-you now have 2 sockets, open 2 streams for reading, and 2 for writing
-start reading -write everything you read to the appropriate stream

 

but i'm afraid that it's work on VNC or not.

anyone have idea?

 

+------------------------------------------------+
| Dept. Information and Communications                      
| Hankuk University of Foreign Studies                           
| KyuHwan-Lee                                                   
| E-mail :icelala "at" empal.com
| Phone : (+82)02-421-5600 HP : 017-211-7345
+------------------------------------------------+

------------------------------------------------------------------------

"193; CV4Y 8^@O0x0# 30MB, C7:NFD "at" O 10MB" "EkEkF"4B @Z5?;hA& FxE:8^@O!"
?%FD=:0! 885g 8^@O, ?%FH (http://www.empal.com)
---------------------------------------------------------------------
To unsubscribe, send a message with the line: unsubscribe vnc-list to
majordomo "at" uk.research.att.com See also:
http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, send a message with the line: unsubscribe vnc-list
to majordomo "at" uk.research.att.com
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------