QuerySetting don't Work

[Peaks, Jeremy]

Cheers James, I would say this is even easier then, unless for some reason you did want to get rid of some redundant code (this small amount would not gain you anything though).

Jeremy Peaks

-----Original Message-----
From:
ou1=SMTP;o=MAFF;p=MAFF400;a=ATTmail;c=GB;dda:RFC-822=owner-vnc-list(a)uk
.research.att.com; 
Sent: 19 June 2000 14:01
To: vnc-list
Subject: Re: QuerySetting don't Work


You can have the above behaviour by setting:



    QuerySetting = 3 in the default user section and

    AllowProperties = 0 in the default user section.



This will prevent the user from overriding the QuerySetting behaviour.



Cheers,



James "Wez" Weatherall

--

          "Xenophobes should go back to Xenophobia"

Laboratory for Communications Engineering, Cambridge - Tel : 766513

AT&T Labs Cambridge, UK                              - Tel : 343000

---------------------------------------------------------------------

To unsubscribe, send a message with the line: unsubscribe vnc-list

to majordomo "at" uk.research.att.com

See also: http://www.uk.research.att.com/vnc/intouch.html

---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, send a message with the line: unsubscribe vnc-list
to majordomo "at" uk.research.att.com
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------