AW: disable viewing properties dialog

[Kröpfl, Thomas]

thanks for your hint.

the following configuration now meets my needs:

[HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3]
"AuthRequired"=dword:00000000
"AuthHosts"="-:?192.168:"

[HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3\Default]
"SocketConnect"=dword:00000001
"AutoPortSelect"=dword:00000001
"InputsEnabled"=dword:00000001
"LocalInputsDisabled"=dword:00000000
"QuerySetting"=dword:00000002
"QueryTimeout"=dword:0000000a
"Password"=hex:**,**,**,**,**,**,**,**
"PollUnderCursor"=dword:00000000
"PollForeground"=dword:00000001
"PollFullScreen"=dword:00000000
"OnlyPollConsole"=dword:00000001
"OnlyPollOnEvent"=dword:00000000
"AllowProperties"=dword:00000000

[HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3\SYSTEM]
"QuerySetting"=dword:00000001
"Password"=hex:**,**,**,**,**,**,**,**

kroepfl thomas
(network administrator)

-----Urspr|ngliche Nachricht-----
Von: James ''Wez'' Weatherall [mailto:jnw22 "at" cam.ac.uk]
Gesendet: Dienstag, 05. Dezember 2000 12:27
An: vnc-list "at" uk.research.att.com
Betreff: Re: disable viewing properties dialog


What you actually want is to set AllowProperties and then to set the _local_
per-user properties for the Default user to the required settings, on each
machine.  The Global per-user settings can be modified by the user in the
registry, therefore AllowProperties=0 makes no sense if you read them.

Cheers,

James "Wez" Weatherall
--
          "The path to enlightenment is /usr/bin/enlightenment"
Laboratory for Communications Engineering, Cambridge - Tel : 766513
AT&T Labs Cambridge, UK                              - Tel : 343000

----- Original Message -----
From: <Krvpfl>; "Thomas" <Kroepfl.Thomas "at" poloplast.com>
To: <vnc-list "at" uk.research.att.com>
Sent: Tuesday, December 05, 2000 10:41 AM
Subject: disable viewing properties dialog


> hi!
>
> is there a possibility to disable the properties dialog without stopping
the
> global-per-user settings?
>
> i want the user to be informed if there is an incomming connection, and
the
> user has to accept the connection (global per-user setting:
> QuerySettings=2). but if nobody is working on the winvnc-server
> (logon-screen), i want to get the screen without acception (local per-user
> setting: QuerySettings=1).
>
> this configuration works very fine. the user should not be able to change
> anything in the configuration, e.g. the password. but if i activate
> AllowProperties=0 (local per-user setting) to disable the properties
dialog
> box, all global per-user settings are stopped.
>
> any idea?
>
> kroepfl thomas
> (network administrator)
> ---------------------------------------------------------------------
> To unsubscribe, send a message with the line: unsubscribe vnc-list
> to majordomo "at" uk.research.att.com
> See also: http://www.uk.research.att.com/vnc/intouch.html
> ---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, send a message with the line: unsubscribe vnc-list
to majordomo "at" uk.research.att.com
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, send a message with the line: unsubscribe vnc-list
to majordomo "at" uk.research.att.com
See also: http://www.uk.research.att.com/vnc/intouch.html
---------------------------------------------------------------------